Water Inlet Electrovalve; Operation Of Token Box / Home Automation Connection - Teuco P013A Serie Gebrauchsanweisung

wATER INLET ELECTROvALvE

The system is set to automatically reinstate the water level in the compensation tank .
During this phase, the display shows:
The system is set to add water for max . an hour a day .
A control function checks the level is reached every time the electrovalve opening is operated .
If the water level is not reached for seven consecutive times (7 days), the system stops (signifi-
cant water leakages, lack of water supply, faulty electrovalve, level sensor failures, etc .) .
The display shows:
Carry out the necessary checking or contact the technical service .
To remove the block, press the ► key.

OpERATION OF TOKEN bOx / hOME AUTOMATION CONNECTION

The system features a contact pair pre-set for the connection of a token box or a home automa-
tion control .
After receiving the signal (the contact is closed for few seconds), the system switches off the
spa pumps in sequence .
The pumps works for the time pre-set on the control panel .
12:34 01/03/2015
H 2 0 ON
12:34 01/03/2015
INLET EV BLOCK
H2O STOP
EN
37