Manual Mowing; Docking The Robotic Mower; Charging The Battery; Automatic Charging - Stihl RMI 632 Gebrauchsanleitung

15.6 Manual mowing

The impact sensor and edge
limitation are disabled during
manual mowing.
● Charge the battery if necessary
( 15.8)
● Remove the control panel (
● Activate the "Manual mowing"
submenu in the "More" menu (
● Move and steer the robotic
mower using the control pad.
Two forward speeds are
available:
Slow (press button lightly), Fast (press
button firmly).
● Always ensure sufficient distance
between the mowing deck and your feet
before activating the mowing blade –
always walk behind the robotic mower.
( 4.2)
● To activate the mowing blade,
press and hold the OK button
with your right thumb, then press
and hold the Mow button with
your left thumb and release the
OK button. The mowing blade rotates
for as long as the Mow button is
pressed.
● During manual mowing, keep the Mow
button pressed down with your left hand
and operate the control pad with your
right hand.
● To deactivate the mowing blade,
release the Mow button.
● Charge the battery after manual
mowing. ( 15.8)
162

15.7 Docking the robotic mower

Docking during automatic operation:
The robotic mower automatically travels to
the docking station when the active time
ends or when the battery is discharged.
Forcing docking:
15.2)
● If necessary, insert the control panel
( 15.2)
11.8)
● If necessary, switch on the
docking station (
● Activate drive home. (
During a mowing operation,
Homecall can also be activated
on the docking station.
● RMI 632 C, RMI 632 PC:
Send the robotic mower to the docking
station in the app. (
After docking, no further mowing
operation takes place in the current
active time.
Manual docking:
● Steer the robotic mower to the docking
station using the control panel – remove
the control panel for this purpose
( 15.2) and activate the "Manual
mowing" submenu in the "More"
menu (
or
● Push the robotic mower into the
docking station by hand.
13.1)
11.6)
10.)
11.8).
Lift the robotic mower slightly by the
carrying handle (1) and relieve the weight
on the drive wheels. Push the machine,
resting on its front wheels, into the docking
station.
● If necessary, insert the control panel
( 15.2)

15.8 Charging the battery

Only charge the battery via the
docking station.
Never remove the battery and
charge it using an external charger.

Automatic charging:

During mowing, charging occurs
automatically when the robotic mower
docks into the docking station at the end of
the mowing operation.
Starting charging manually:
● Following use in secondary areas,
return the robotic mower to the mowing
area and dock it. ( 15.7)
● Dock the robotic mower following
interruption of a mowing operation.
( 15.7)
0478 131 9954 A - EN