First Mowing Operation After Initial Installation - Stihl RMI 632 Gebrauchsanleitung

After initial installation, the safety
level "None" is activated.
Recommendation:
Set the safety level to "Low",
"Medium" or "High". This ensures
that unauthorised persons cannot
change any settings or operate the
robotic mower using other docking
stations. ( 11.15)
RMI 632 C, RMI 632 PC:
In addition, activate GPS
protection. ( 11.15)
RMI 632 C, RMI 632 PC:
To be able to use all the functions of the
robotic mower, the iMOW® app must be
installed on a smartphone or tablet with an
Internet connection and GPS receiver, and
started. ( 10.)
Close the dialog window by pressing
the OK button.
9.15 First mowing operation after initial
installation
If completion of initial installation occurs
during an active time, the robotic mower
will begin to mow the mowing area
immediately.
136
If completion of the initial installation
occurs outside the active time, a
mowing operation can be started by
pressing the OK button. If you do not wish
the robotic mower to mow, select "No".
10. iMOW® app
The models RMI 632 C, RMI 632 PC can
be operated using the iMOW® app.
The app is available for the most popular
operating systems in respective app
stores.
Further information is available on
the web.imow.stihl.com/systems/
homepage.
The regulations in the "For your
safety" section apply in particular to
all users of the iMOW® app. (
Activation:
In order for the app and robotic mower to
be able to exchange data, the machine
must be activated with the owner's e-mail
address by the specialist dealer. An
activation link is sent to the e-mail address.
The iMOW® app should be installed on a
smartphone or tablet with an Internet
connection and GPS receiver. The e-mail
recipient is defined as the administrator
and primary user; this person has full
access to all functions.
Keep the e-mail address and
password safe so that the
iMOW® app can be reinstalled
should the smartphone or tablet be
changed (e.g. if the mobile phone is
lost).
Data traffic:
Data transmission from the robotic mower
to the Internet (M2M service) is included in
the purchase price.
Data transmission does not take place
continuously and can therefore take a few
minutes.
The transmission of data from the app to
the Internet will result in costs that must be
borne by the user; these costs will be
determined by the contract with the mobile
phone provider or Internet provider.
GPS protection is only available
without e-mail and SMS notification
without a mobile radio connection
and app.
Main functions of the app:
– Viewing and editing the mowing plan
– Starting mowing
– Switching automatic mowing on and off
6.)
– Sending the robotic mower to the
docking station
– Changing the date and time
0478 131 9954 A - EN