SPORTSTECH WRX700 Benutzerhandbuch Seite 44

PULSE P-30~230
4
Heart Rate
SPM
5 Rowing Stro- 0~999
ke Frequency
WATT
6 0~999
Power
TOTAL
Total number
7 0~9999
of rowing
strokes
STROKES
8 Rowing Stro- 0~9999
kes
0-30~230 (±1)
BPM BPM
Nein
Nein
Nein
0~9990 (±10)
44
a. When a heart rate is measured, it indi-
cates the initial result after 7.5 seconds
(counting from the first pulse beat).
b. If no heart rate has been measured for
6s, the result is reset to zero.
c. The calculation method can be found
in Appendix 1.
d. If the heart rate is above the preset
value, the heart rate in the pulse window
will flash every second or the PULSE
OVER ALARM = 2 ALARMS per se-
cond will sound, (the alarm sounds every
second)
e. This data shares the same window as
the calorie data and is displayed alterna-
tely every 5 seconds.
In START mode:
a. After a signal for 3s has been recei-
ved, the rate is displayed.
b. If no signal is received for 4s, the rate
is reset to zero after 6s.
c. This data shares the same data
window with WATT and is displayed
alternately every 5 seconds.
a. When a signal for 3s has been recei-
ved, the power value is displayed.
b. If no signal is received for 4s, the value
is reset to zero after 6s.
d. This data shares the same window
with SPM and is displayed alternately
every 5 seconds.
The strokes and the total number of
strokes share the same window and are
displayed alternately every 5 seconds.
The rowing strokes and total strokes
share the same window and are display-
ed alternately every 5 seconds.