Switching Off The Device - Steinbach Twin Originalbetriebsanleitung

2. Select your desired autostart function by pressing the AUTOSTART button.
3. Press the ON/OFF button on the control unit.
Adapt the cleaning time to your pool size if necessary.
Cleaning has started, the indicator indicates the settings of the last selected cleaning
program and the battery runtime LED starts to blink.

Switching off the device

Proceed as follows to switch off the device:
1. Switch off the device after the end of the cleaning program.
2. Disconnect the control unit from the power supply and the device.
3. Lift the device out of the pool.
4. Clean the filter units and the device.
5. If you use the autostart function, place the device in the pool again and connect the
control unit to the power supply.
Stopping cleaning
Cleaning stops automatically once the set running time has expired.
All cleaning time LEDs blink.
Terminating the cleaning early
1. Press the ON/OFF button.
The control unit is switched off, all LEDs are off.
Disconnecting the control unit
Handling the power plug with wet hands can lead to an electric
shock.
- Never touch the power plug with wet hands.
1. Disconnect the power plug from the grounded socket.
WARNING!
Risk of electric shock!
39