Safety; Risk Of Electric Shock - Steinbach Twin Originalbetriebsanleitung

Weight of the packaging unit.
Dimensions of the packaging unit.

Safety

The following signal words are used in this user manual.
WARNING!
CAUTION!
NOTICE!
General safety instructions
Faulty electric installation or excess mains voltage can cause an
electric shock.
- Only connect the power cable if the mains voltage of the socket
matches that on the type plate.
- Only connect the power cable to an easily accessible socket so
that you can quickly disconnect it in the case of a fault.
- Only connect the power cable to a grounded socket.
- Only operate the device on a grounded socket secured with at
least 16A.
- The device must be powered via a residual current device with a
rated residual current of at most 30 mA.
- Do not operate the device if it shows visible damage or if the
power cable is defective.
30
This signal symbol/word denotes a hazard with an
average risk level that could lead to death or severe
injury if it is not avoided.
This signal symbol/word denotes a hazard with a low
risk level that could lead to mild or moderate injury if
it is not avoided.
This signal word provides a warning about potential
material damage.
WARNING!

Risk of electric shock!