Steinbach Twin Originalbetriebsanleitung Seite 38

Connecting the control unit
Handling the power plug with wet hands can lead to an electric
shock.
- Never touch the power plug with wet hands.
High temperatures can damage the control unit.
- Do not cover the control unit.
- Place the control unit in the shade, if possible.
1. Only let as much of the floating cable
all the spots in the pool.
2. Connect the plug of the floating
cable in the right position to the
5
control unit
8
connection together.
3. Attach the control unit
of at least A=3.5 m to the pool with the
safety rope
10
pulled into the water.
4. Connect the power plug to a grounded
socket.
The control unit is connected.
Starting cleaning
1. Press the AUTOSTART button on the control unit.
The indicator shows the setting of the last selected autostart function. All LEDs of the
autostart function blink if periodical cleaning has not been selected.
38
Risk of electric shock!
and screw the
at a distance
8
so that it cannot be
WARNING!
NOTICE!
into the water so that the device can reach
5
5
6
10
5
A
8
8