Description; Description Of The Pool Cleaner; Functions Of The Control Unit - Steinbach Twin Originalbetriebsanleitung

Checking the delivery for completeness and damage
1. Open the packaging carefully.
2. Take all parts out of the packaging.
3. Check the completeness of the delivery.
4. Check the delivery for damage.

Description

Description of the pool cleaner

The device cleans the floor and the walls of the pool. The cleaning roller of the device
removes biofilms in the pool but cannot remove any algae. Detached deposits and
floating substances are filtered out of the pool water.

Functions of the control unit

The power adapter integrated in the control unit supplies the pool cleaner with 20 V DC.
Autostart function
Use this function to set the automatic start of operation.
Use the AUTOSTART button
the start of operation, the lit LED
interval is active, all LEDs blink or none of the LEDs of the LED display blink
- 1D repeats cleaning daily.
- 3D repeats cleaning every 3 days.
- 7D repeats cleaning every 7 days.
Time function
13 15
Use this function to set the running time.
34
A
12
13
12 16
to switch between the cleaning intervals. Before and after
12
16
AUTO
START
1D 3 D 7 D
TIME
1 H 1.5H 2 H
indicates the currently selected mode. If no cleaning
16
15
14
.
16