Siemens SINUMERIK 840D sl Handbuch Seite 211

03/2009
28212 MM_NUM_PROTECT_AREA_CONTOUR
- Elements für aktive Schutzbereiche (DRAM)
-
- -
28250 MM_NUM_SYNC_ELEMENTS
- Anzahl Elemente für Ausdrücke in Synchronaktionen
-
- -
28251 MM_NUM_SAFE_SYNC_ELEMENTS
- Anzahl Elemente für Ausdrücke in Safety-Synchronaktionen DWORD
-
- -
28252 MM_NUM_FCTDEF_ELEMENTS
- Anzahl der FCTDEF-Elemente
-
- -
28254 MM_NUM_AC_PARAM
- Dimension von $AC_PARAM.
-
- -
28255 MM_BUFFERED_AC_PARAM
- $AC_PARAM[] wird im SRAM gespeichert.
-
- -
28256 MM_NUM_AC_MARKER
- Dimension von $AC_MARKER
-
- -
28257 MM_BUFFERED_AC_MARKER
- $AC_MARKER[] wird im SRAM gespeichert.
-
- -
28258 MM_NUM_AC_TIMER
- Anzahl Zeitvariablen $AC_TIMER (DRAM)
-
- -
28260 NUM_AC_FIFO
- Anzahl der FIFO-Variable für Synchronaktionen
-
- -
© Siemens AG 2009 All Rights Reserved
SINUMERIK 840D sl, 840Di sl, SINAMICS, Listen (LIS1sl), 03/2009
30,30,30,30,30,30,30,3 0
0,30,30,30,30,30...
159,159,159,159,159,1 0
59,159,159,159...
0,0,0,0,0,0,0,0,0,0,0,0,0 0
,0,0,0
3,3,3,3,3,3,3,3,3,3,3,3,3 0
,3,3,3
50,50,50,50,50,50,50,5 0
0,50,50,50,50,50...
0,0,0,0,0,0,0,0,0,0,0,0,0 0
,0,0,0
8,8,8,8,8,8,8,8,8,8,8,8,8 0
,8,8,8
0,0,0,0,0,0,0,0,0,0,0,0,0 0
,0,0,0
0,0,0,0,0,0,0,0,0,0,0,0,0 0
,0,0,0
0,0,0,0,0,0,0,0,0,0,0,0,0 0
,0,0,0
Maschinen- und Settingdaten
Kanalspezifische NC-Maschinendaten
C11, C02, C06, A3
C09
DWORD POWER ON
50 7/2
C02, - 2.8,6.1
DWORD POWER ON
32000 7/2
C02, - -
POWER ON
32000 7/2
C02 2.4,2.8,6.1
DWORD POWER ON
100 7/2
C02 -
DWORD POWER ON
20000 7/2
C02 2.3,6.1
DWORD POWER ON
1 7/2
C02 2.3,6.1
DWORD POWER ON
20000 7/2
C02 2.3,6.1
DWORD POWER ON
1 7/2
C02 2.3,2.4,6.1
DWORD POWER ON
10000 7/2
C01 2.3,2.4,6.1
DWORD POWER ON
10 7/2
2-211