Siemens SINUMERIK 840D sl Handbuch Seite 153

03/2009
18360 MM_EXT_PROG_BUFFER_SIZE
- FIFO-Buffer Größe für Abarbeiten von Extern (DRAM)
-
- -
18362 MM_EXT_PROG_NUM
- Anzahl der gleichzeitig von Extern abarbeitbaren
Programmebenen
-
- -
18370 MM_PROTOC_NUM_FILES
- Maximale Anzahl von Protokoll-Files.
-
- 10
18371 MM_PROTOC_NUM_ETPD_STD_LIST
- Anzahl von Standard-Datenlisten ETPD.
-
- 10
18372 MM_PROTOC_NUM_ETPD_OEM_LIST
- Anzahl von OEM-Datenlisten ETPD.
-
- 10
18373 MM_PROTOC_NUM_SERVO_DATA
- Anzahl von Servo-Daten für Protokoll.
-
- 10
18374 MM_PROTOC_FILE_BUFFER_SIZE
- Größe des Puffers eines Protokollfiles.
-
- 10
18375 MM_PROTOC_SESS_ENAB_USER
- Für Sessions freigegebene User.
-
- 10
18390 MM_COM_COMPRESS_METHOD
- Unterstützte Komprimierverfahren.
-
- -
18400 MM_NUM_CURVE_TABS
- Anzahl der Kurventabellen (SRAM)
-
- -
18402 MM_NUM_CURVE_SEGMENTS
- Anzahl der Kurvensegmente (SRAM)
-
- -
18403 MM_NUM_CURVE_SEG_LIN
- Anzahl der linearen Kurvensegmente (SRAM)
-
- -
18404 MM_NUM_CURVE_POLYNOMS
- Anzahl der Kurventabellenpolynome (SRAM)
-
- -
© Siemens AG 2009 All Rights Reserved
SINUMERIK 840D sl, 840Di sl, SINAMICS, Listen (LIS1sl), 03/2009
50 30
1 0
2,0,0,0,0,2,2,2,0,3 0
25,0,0,0,0,25,25,25,0,3 0
0,0,0,0,0,0,0,0,0,0 0
0,0,0,0,0,10,10,10,0,0 0
8000,8000,8000,8000,8 5000
000,8000,8000...
0,0,0,0,0,1,1,1,0,0 0
0x01 -
0 0
0 0
0 0
0 0
Maschinen- und Settingdaten
Allgemeine NC-Maschinendaten
N01 B1,K1
DWORD POWER ON
1000000 7/2
N01 K1
BYTE POWER ON
13 7/2
N02 D1,OEM
DWORD POWER ON
10 1/1
N02 D1,OEM
DWORD POWER ON
25 1/1
N02 D1,OEM
DWORD POWER ON
20 1/1
N02 D1
DWORD POWER ON
20 1/1
N02 -
DWORD POWER ON
- 1/1
N02 -
BYTE POWER ON
1 1/1
EXP, N01, N02 -
DWORD POWER ON
- 2/2
N02, N09 M3
DWORD POWER ON
INT_MAX 1/1
N02, N09 M3,B3
DWORD POWER ON
INT_MAX 1/1
N02, N09 M3
DWORD POWER ON
INT_MAX 1/1
N02, N09 M3,B3
DWORD POWER ON
INT_MAX 1/1
2-153