Recommendations For Good Printing Results - BigRep ONE Bedienungsanleitung

Operation and Control
6
Initiating the Printing Process
›
Select Start Print.
›
The printing process starts automatically once the extruders and the bed
have reached the required temperature.
›
Please check if the printing process initiates correctly.
Canceling / Pausing the Printing Process
›
A visual signal on the printer display notifies you when the print is comple-
ted.
›
You can pause and resume printing by selecting Pause and Resume.
Please note that pausing the printing process can lead to minimally visible
inconsistencies in the layer.
›
The Out Of Filament notification indicates that the printer has run out of
filament.
Removing the Printed Object
›
Once the printed object is completed, the extruder moves to the top and
the print bed heating is turned off.
›
Allow the print bed to cool down to room temperature.
›
Carefully remove the object from the print bed, use the plastic scraper if
necessary.
Turning Off the Printer
›
Select Turn Off in the Main Menu and confirm. Always set the main switch
(O) to Off first!

6.3. Recommendations for Good Printing Results

Please find more information in the customer portal.
68
Kap. 7.1 Changing Filament.
&
Removing the printed object before the bed has cooled down be-
ars the risk of irreversible damage to the object's shape!
BigRep ONE