Safety Hazards - BigRep ONE Bedienungsanleitung

BigRep ONE

Safety Hazards

Electrical Hazards
DANGER — HIGH ELECTRIC VOLTAGE
There is an immediate risk of fatal injury in case of contact with live parts.
In case of damage to the insulation, disconnect the device from the power
source immediately and arrange for a qualified specialist to carry out repair!
DANGER — HIGH ELECTRIC VOLTAGE
This machine is equipped with an uninterruptible power supply (UPS) con-
taining lethal voltage even when the printer is disconnected from its power
supply. The UPS must not be opened
Never attempt to bypass or de-activate fuses!
Keep moisture away from live parts!
In case of water damage disconnect the device from its power source!
Switch device off completely and disconnect from power source before conduc-
ting any work on the electrical system as well as before any maintenance and
repair work.
Any work on electrical components may only be carried out by qualified specia-
lists. This applies especially for any work on components inside the control cabi-
net! Exception: this does not apply to replacing the fuse in the UPS.
Chemical Hazards
Please be sure to always refer to the specifications provided by the manufacturer
or retailer for the individual types of filament material.
CAUTION
Never clean the print bed with solvent-based detergents. They may produce
toxic fumes when heated.
Unauthorized filaments can produce vapors with harmful health effects.
Make sure that the working environment is sufficiently ventilated during the prin-
ting process.
Safety
2
47