Error Codes - Pkm DW12A++7TI Bedienungsanleitung

3. Overfilled rinse aid container /
spilled rinse aid.
4. The appliance is not levelled.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact a service department.

Error codes

E1
E2
E3
E4
E5
E6
E7
If overflow occurs, turn off the main water supply before calling a service. If there
is water in the base pan because of an overfill or small leak, remove the water
before restarting the dishwasher.
9
Model
Control
Cleaning capacity
Energy efficiency class
Annual energy consumption
Energy consumption/1 standard cycle
Energy consumption/off-mode
Energy consumption/left-on mode
Annual water consumption
Drying efficiency class
Standard cleaning cycle/duration
Noise emission
Mounting
Could be built-in
Dimensions H*W*D in cm
Power consumption
Voltage/frequency
Appliance leaks.
1. Wipe up the rinse aid.
2. Level the appliance.
Door opened.
Water inlet.
Water drainage.
Temperature sensor. Temperature sensor malfunction.
Overflow/leakage
Water leakage.
Heating elements.
TECHNICAL DATA
1
2
3
4
5
72
seal functioning.
Door open during operation.
Water inlet malfunction.
Water drainage malfunction.
Overflow/leakage has occurred.
Water leakage has occurred.
Abnormal heating.
Dishwasher
Electronic
12 standard place settings
259 kWh
0.92 kWh
Eco/172 minutes
55dB(A)
Freestanding
80,50-88,00*59,60*57,80
AC 220-240V/50Hz
9
A++
0.35W
0.9W
3080 l
A
yes
1850W