The Dl-Dvi-Vision-Ip-Fiber Series; Use As Extender Or Matrix Switch Module - G&D DL-DVI-Vision-IP-Fiber-Serie Installation Und Bedienung

The DL-DVI-Vision-IP-Fiber series

The DL-DVI-Vision-IP-Fiber series
IMPORTANT:
Data transmission of devices of the
G&D devices of other series!
The remote console of an extender line is connected to an user module of the
DL-DVI-Vision-IP-Fiber
be operated and optionally a local console to a compatible computer module of the
series.
Vision-IP
The computer can either be operated at the remote console of the user module or at
the local console of the computer module.
Both the computer module and the user module are connected using two optical
fibres.
NOTE:
Alternatively, you can connect a compatible computer module to the user
module via direct cabling.
Signals of keyboard, mouse and DVI video of the computer connected are transmit-
ted using these fibres and enable you to operate the computer remotely.

Use as extender or matrix switch module

You can use the module as either extender or matrix switch module:
 Extender module:
and an compatible computer module. The configured connection between the mod-
ules is restored each time the modules are restarted.
 Matrix switch module:
can use the module as end devices of the matrix switch.
In this case, configure a KVM-over-IP connection to the IP matrix switch for the
modules.
In this configuration, the IP matrix switch enables flexible connection of the user
module to a computer module.
5 · G&D DL-DVI-Vision-IP-Fiber
series ( DL-DVI-Vision-IP-Fiber-CON
Configure a KVM-over-IP connection between the user module
In combination with the IP matrix switch
IP series is not compatible to
). You connect the computer to
ControlCenter-IP
, you