G&D DL-DVI-Vision-IP-Fiber-Serie Installation Und Bedienung Seite 116

Configuration
How to set the operating mode of the RS232 interface:
1. Press Ctrl+Num
2. Select the row
operating mode of the RS232 interface of the console module (
Select the row
operating mode of the RS232 interface of the computer module (
3. Under RS232 port mode
RS232  The data stream of an RS232 device is transmitted from the
RS422  The data stream of an RS422 device is transmitted from the
4. Press F2 to save your settings.
1. In the menu, click on
2. Click on the computer module (CPU) you want to configure and then
click on Configuration
3. Click on the tab
4. Click on the tab
RS232 interface of the computer module.
Click on the tab
RS232 interface of the console module.
5. Select one of the options of the
graph
Configuration
 The data stream of an RS232 device is transmitted from the
RS232
 The data stream of an RS422 device is transmitted from the
RS422
6. Click on Save
37 · G&D DL-DVI-Vision-IP-Fiber
(default) to open the on-screen display.
Console setup and press
Target setup and press
press
computer module to the console module (default setting).
computer module to the console module via separately
available G&D RS232-422 adapters
KVM extender
.
General .
if you want to adjust the operating mode of the
CPU
if you want to adjust the operating mode of the
CON
:
computer module to the console module (default setting).
computer module to the console module via separately
available G&D RS232-422 adapters
.
Enter if you want to adjust the
Enter if you want to adjust the
F8 to select on of the following options:
.
.
Serial communication
.
CON ).
CPU
field under the para-
).