G&D DL-DVI-Vision-IP-Fiber-Serie Installation Und Bedienung Seite 118

Configuration
1. In the menu, click on
2. Click on the computer module (CPU) you want to configure and then click 
on
Configuration
3. Click on the tab
4. Click on the tab
the local workstation (on the
Click on the tab
the remote workstation (on the
5. In the field
Always on
Temporarily off
Permanently off
6. Click on Save
Related topics:
 Changing the time span of the input lock on page 34
 Right for exclusive access to the console on page 35
39 · G&D DL-DVI-Vision-IP-Fiber
KVM extender
.
.
General
CPU if you want to configure the video operating mode of
if you want to configure the video operating mode of
CON
, select one of the following options:
Image display
 The computer screen is displayed on both the
monitor of the active and the monitor of the 
concurrent console (default).
 The screen of this console (depending on the selection
made in step 4) is temporarily switched off whenever an
entry is made on the concurrent console.
After the time period of the input lock (see below) has
elapsed, the screen is automatically switched on again.
 The screen of this console (depending on the selection
made in step 4) is switched off permanently if an entry is
made on the concurrent console.
After the time period of the input lock (see below) has
elapsed, you need to make an entry on this console to
switch on the screen again.
.
.
module).
CPU
module).
CON