Reinitialising Usb Input Devices - G&D DL-DVI-Vision-IP-Fiber-Serie Installation Und Bedienung

Reinitialising USB input devices

Once you connect a USB keyboard or mouse to the KVM extender, the input device
is initialised and can be used without restrictions.
The USB connection of some USB input devices needs to be reinitialised after a cer-
tain time. Activate the automatic reinitialisation of the USB input devices if a USB
keyboard or mouse no longer reacts to your inputs during operation.
How to enable/disable reinitialisation of USB input devices:
1. Press
Ctrl+Num
2. Select the row
of the remote console (at the
Select the row
setting of the local console (at the
3. Under USB auto refresh
 The status of the USB devices is monitored.
only faulty
If communication to a USB device is interrupted, this
device is reinitialised (default setting).
all  All USB devices are reinitialised regularly.
 The connected USB input devices do not need to be
off
reinitialised.
4. Press to save your settings.
F2
(default) to open the on-screen display.
and press
Console setup
CON module).
and press
Local console setup
CPU
press F8 to select one of the following options:
if you want to change this setting
Enter
if you want to change this
Enter
module).
G&D DL-DVI-Vision-IP-Fiber · 50
Configuration