The Dp-Vision-Ip-Fiber Series; Use As Extender Or Matrix Switch Modules - G&D DP-Vision-IP-Fiber-Serie Installation Und Bedienung

The DP-Vision-IP-Fiber series

The DP-Vision-IP-Fiber series
IMPORTANT:
Data transmission of devices of the
G&D devices of other series!
KVM extenders of the
user modules.
Connect the computer to be operated as well as an optional console to the computer
module ( DP-Vision-IP-Fiber-CPU
( DP-Vision-IP-Fiber-CON
The computer can either be operated at the remote console of the user module or at
the local console of the computer module.
Both the computer and the user module are connected via two optical fibres over an
IP-based Gigabit Ethernet.
NOTE:
You can also use a cable to establish a direct connection between computer
module and user module.
Signals of keyboard, mouse and DisplayPort™ video of the computer connected are
transmitted using these fibres and enable you to operate the computer remotely.

Use as extender or matrix switch modules

You can use the modules as either extender or matrix switch modules:
 Extender modules:
and the user module. The configured connection between the modules is restored
each time the modules are restarted.
 Matrix switch modules:
you can use the modules as end devices of the matrix switch.
In this case, configure a KVM-over-IP connection to the IP matrix switch for the
modules.
In this configuration, the IP matrix switch enables the flexible connection of a user
module to a computer module.
5 · G&D DP-Vision-IP-Fiber
DP-Vision-IP-Fiber
). The remote console is connected to the user module
).
Configure a KVM-over-IP connection between the computer
In combination with the IP matrix switch
IP series is not compatible to
series consist of a computer module and a
,
ControlCenter-IP