Changing The Scancode Set Of Ps/2 Keyboards - G&D DL-DVI-Vision-IP-Fiber-Serie Installation Und Bedienung

How to select a USB-HID mode:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Press F2 to save your settings.
1. In the menu, click on
2. Click on the computer module (CPU) you want to configure and then click 
on Configuration
3. Click on the tab
4. Select the desired option (see above) under
5. Click on Save

Changing the scancode set of PS/2 keyboards

If you press a key at the PS/2 keyboard, the keyboard processor sends a data packet
that is called scan code. The two common scancode sets (sets 2 and 3) contain differ-
ent scancodes.
In the default configuration, the KVM extender interprets any entry made at the
PS/2 keyboard with the scancode set 2.
Use the scancode set 3 if you cannot enter the pipe "|" or the arrow keys do not
work as expected.
(default) to open the on-screen display.
and press
Target setup
and press
USB HID mode
.
KVM extender
.
and then on the tab
General
.
.
Enter
key to select an option (see above).
F8
.
CPU
.
USB HID mode
G&D DL-DVI-Vision-IP-Fiber · 48
Configuration