Enabling Or Disabling Ddc/Ci Support - G&D DL-DVI-Vision-IP-Fiber-Serie Installation Und Bedienung

Configuration

Enabling or disabling DDC/CI support

The computer and user modules supported by the
ready to support monitors with
After the function has been activated, the DDC/CI information is transparently for-
warded to the monitor in order to support as many monitors as possible. However,
we cannot guarantee the support for all monitors.
How to configure the DDC/CI support of a user module:
1. Press Ctrl+Num
2. Select the row
The Freeze mode is adjusted separately for each video channel of the user module. The
following options can be adjusted separately for each video channel of multi-channel
devices.
3. Under DDC/CI support
disabled
CPU > monitor
bidirectional
4. Press F2 to save your settings.
1. In the menu, click on
2. Click on the computer module (CPU) you want to configure and then click 
on Configuration
3. Click on the tab
4. When using a multi-channel device, click on the desired video channel and
then click on
5. Select one of the options given under
Disabled
CPU > monitor
Bidirectional
6. Click on Save
45 · G&D DL-DVI-Vision-IP-Fiber
DDC/CI functionality.
(default) to open the on-screen display.
Console setup and press
press F8 to select on of the following options:
 The transmission of DDC/CI signals is disabled (default).
 The transmission of DDC/CI signals is carried out
exclusively from the CPU to the monitor
 The transmission of DDC/CI signals is carried out by
bidirectionally.
KVM extender
.
.
Video channels
Configuration .
 The transmission of DDC/CI signals is disabled (default).
 The transmission of DDC/CI signals is carried out
exclusively from the CPU to the monitor
 The transmission of DDC/CI signals is carried out by
bidirectionally.
.
DL-DVI-Vision-IP-Fiber
Enter .
.
:
DDC/CI monitor
system are