Changing The Time Span Of The Input Lock - G&D DL-DVI-Vision-IP-Fiber-Serie Installation Und Bedienung

Changing the time span of the input lock

When carrying out keyboard or mouse inputs at a console, the KVM extender auto-
matically locks the input devices of the concurrent console. The lock is lifted if no
input is made at the active console within the adjusted timing of the input lock
(default: 1 second).
After the lock has been lifted, both users can operate the computer again.
The time span of the input lock can be adjusted between 1 and 300 seconds.
How to change the timespan of the input lock:
1. Press
Ctrl+Num
2. Select the row
3. Select the row
4. Under Multiuser input lock
300 seconds).
5. Press F2 to save your settings.
1. In the menu, click on
2. Click on the computer module (CPU) you want to configure and then click 
on
Configuration
3. Click on the tab
4. Enter the desired time period of the input lock (1 to 300 seconds) in the field
Multiuser input lock
5. Click on
Save
Related topic:
 Operating the KVM extender exclusively on page 20
(default) to open the on-screen display.
System setup and press
Hotkey and press Enter
enter the desired timespan of the input lock (1 to
.
KVM extender
.
and then on the tab
General
.
.
Enter .
.
.
CPU
G&D DL-DVI-Vision-IP-Fiber · 34
Configuration