Activating A Console After The Permanent Switch-Off Of The Image Display; Active Console After Starting An Extender - G&D DL-DVI-Vision-IP-Fiber-Serie Installation Und Bedienung

Activating a console after the permanent switch-off of the
image display
When selecting the Image display
only switched on again after the time period of the input lock has elapsed after a
user input.
In the standard setting, inputs via both keyboard and mouse cause the display to be
switched on. Alternatively, you can allow only keyboard or only mouse inputs as triggers
to activate a console. for picture activation.
How to select valid input device(s) to trigger the activation of a console:
1. In the menu, click on
2. Click on the computer module (CPU) you want to configure and then click 
on
Configuration
3. Click on the tab
4. Select one of the options given under
 Keyboard/Mouse

Keyboard only

Mouse only
5. Click on
Save

Active console after starting an extender

When selecting the
Image display
computer and the console module, both modules do not show an image after restart-
ing the extender.
Only after an input is made at the console, its image is displayed on the monitor.
The setting Activate console after start
play you want to activate immediately after starting the extender.
option Permanently off
.
KVM extender
.
and then on the tab
General
(default)
.
option
Permanently off
allows you to define a module whose image dis-
(see page 38 f.) the display is
.
CPU
Activate console via :
(see page 38 f.) at both the
G&D DL-DVI-Vision-IP-Fiber · 40
Configuration