Extended Settings Of Kvm-Over-Ip Connection; Limiting The Bandwidth; Classifying Ip Packets (Diffserv) - G&D DL-DVI-Vision-IP-Fiber-Serie Installation Und Bedienung

4. Enter the following data under
Host:
Control Port:
NOTE:
In the Host
dialog. This dialog shows you all unpaired remote stations
Detected devices
(computer modules and matrix switches).
Select the desired remote station and press
remote station.
5. Press to save your settings.
F2

Extended settings of KVM-over-IP connection

Limiting the bandwidth

By default, the KVM extender uses the maximum available bandwidth of a Gigabit
Ethernet. By means of manual bandwidth management you can adapt the transmis-
sion to different bandwidth requirements.
How to set a limit for the bandwidth of a KVM-over-IP connection:
1. Use the remote hotkey Ctrl+
2. Select the row
KVM connection
3. Under Bandwidth limit (Mb/s)
connection in Mb/s.
NOTE: Entering the value
4. Press to save your settings.
F2

Classifying IP packets (DiffServ)

For QoS purposes (Quality of Service) you have the possibility to use
(DSCP) to classify the IP packets.
Services Codepoints
Through this classification, you can prioritize the data packets, for example,
through a switch.
You can define a DSCP for the IP packets of the keyboard, mouse and control data
( Communication data packets), as well as the IP packets of the video, audio and RS232
data ( data packets).
Data
Establishing a KVM-over-IP™ connection for the first time
Remote :
Enter the IP address
Enter the number of the
computer module.
field, you can use the key combination
to open the OSD of the computer module.
Num
and press
Enter
you can set the bandwidth limit of a KVM-over-IP
deactivates the limit.
0
of the computer module.
configured in the
Control Port
Ctrl+F8
to apply the IP address of the
Enter
.
G&D DL-DVI-Vision-IP-Fiber · 18
to open the
Differentiated