G&D DL-DVI-Vision-IP-Fiber-Serie Installation Und Bedienung Seite 100

Operation
Immediately after pressing this hotkey, the input devices of the concurrent console
are deactivated. By pressing the hotkey again at the active console, users at both
consoles are again able to operate the KVM extender.
NOTE: After the exclusive operation of the KVM extender has been activated at
one console, the Caps Lock, Num as well as the Scroll Lock LEDs are blinking alter-
nately at the keyboard of the locked console.
The blinking Scroll Lock LED at the active console indicates the exclusive opera-
tion of the KVM extender.
ADVICE:
In the standard configuration of the KVM extender, the computer's
video signal is output at the active as well as the concurrent console monitor.
If necessary, change the video modes of the user modules (see page 38) to switch
off the image of the concurrent console while you operate the extender at the
other console.
 Right for exclusive access to the console on page 35
 Changing the video mode of consoles on page 38
 Changing the exclusive key on page 33
21 · G&D DL-DVI-Vision-IP-Fiber