The Dl-Dvi-Vision-Cat Series; Available Variants; Package Contents - G&D DL-DVI-Vision-CAT Installation Und Bedienung

The DL-DVI-Vision-CAT series

The DL-DVI-Vision-CAT series
The remote console of an extender line is connected to an user module of the
DL-DVI-Vision-CAT series (
You connect the computer to be operated and optionally a local console to a com-
patible computer module of the digital
Both the computer module and the user module are connected via a category 5e (or
better) twisted pair cable. Signals of keyboard, mouse and DVI video of the com-
puter connected are transmitted using these cables and enable you to operate the
computer remotely.
NOTE:
When applying
signals are transmitted using further twisted pair cables.
The computer can either be operated at the remote console of the user module or at
the local console of the computer module.

Available variants

The
DL-DVI-Vision-CAT
transmission of USB 2.0 signals:
Variant
DL-DVI-Vision-CAT-AR-CON
DL-DVI-Vision-CAT-ARU-CON
DL-DVI-Vision-CAT-ARU2-CON
NOTE: With the additionally available
connect a workstation to two different digital extenders of the Vision series.
Alternatively, you can connect a compatible matrix switch to each of these two
channels instead of a digital extender.

Package contents

 1 × user module (
 1 × power cable (PowerCable-2 Standard)
 1 × Installation and Operating Guide
 1 × manual of web application
3 · G&D DL-DVI-Vision-CAT
DL-DVI-Vision-CAT-CON
ARU2 variants of the
series provides further variants that additionally enable the
Video channels
1
1
1
DL-DVI-Vision-CAT-CON
Config Panel
).
Vision series.
DL-DVI-Vision
USB 2.0
not supported
full speed
high speed
CON-2 variants of the user modules, you can
).
system, any additional