Changing The Time Span Of The Input Lock - G&D DL-DVI-Vision-IP-Series Installation Und Bedienung

Configuration

Changing the time span of the input lock

When carrying out keyboard or mouse inputs at a console, the KVM extender auto-
matically locks the input devices of the concurrent console. The lock is lifted if no
input is made at the active console within the adjusted timing of the input lock
(default: 1 second).
After the lock has been lifted, both users can operate the computer again.
The time span of the input lock can be adjusted between 1 and 90 seconds.
How to change the timespan of the input lock:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Under
Multiuser input lock
seconds).
5. Press to save your settings.
F2
1. Click on
IP Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender to be configured.
3. Click the
General
4. Under Multiuser input lock
seconds).
5. Click OK to save your changes.
Related topic:
 Operating the KVM extender exclusively on page 19
33 · G&D DL-DVI-Vision-IP-Fiber
(default) to open the on-screen display.
System setup and press
and press
Hotkey Enter
enter the desired timespan of the input lock (1 to 90
tab.
enter the desired timespan of the input lock (1 to 90
Enter .
.
on the directory tree.