Changing The Time Span Of The Input Lock - G&D DP1.2-Vision-Fiber Installation Und Bedienung

Configuration

Changing the time span of the input lock

When carrying out keyboard or mouse inputs at a console, the KVM extender auto-
matically locks the input devices of the concurrent console. The lock is lifted if no
input is made at the active console within the adjusted timing of the input lock
(default: 1 second).
After the lock has been lifted, both users can operate the computer again.
The time span of the input lock can be adjusted between 1 and 90 seconds.
How to change the timespan of the input lock:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Under
Multiuser input lock
seconds).
5. Press to save your settings.
F2
1. In the menu, click on
2. Click on the KVM extender you want to configure and then click
on
Configuration
3. Click on the tab
4. Enter the desired time period of the input lock (1 to 90 seconds) in the field
Multiuser input lock
5. Click on Save
Related topic:
 Operating the KVM extender exclusively on page 21
35 · G&D DP1.2-Vision-Fiber
(default) to open the on-screen display.
System setup and press
and press
Hotkey
enter the desired timespan of the input lock (1 to 90
KVM extender
.
and then on the tab
General
.
.
Enter .
.
Enter
.
.
CPU