Cleaning The Housing; Function Tests (Manual/Auto) - Helios AIR1 XC Serie Montage- Und Betriebsvorschrift

Installation and Operating Instructions
EN
m
WARNING
+
IMPORTANT
Compact Ventilation Units AIR1 XC
1. Unlock and open the service doors. Support the door with your hand while opening, see Fig. 42.
2. Unscrew the screws of the middle service door, see Fig. 43.
3. Remove service door by pushing it towards the terminal box, see Fig.. 44.
4. Clean the condensate tray with a cloth, see Fig. 45.
5 .8

Cleaning the housing

m
Danger to life due to electric shock!
The unit must be fully isolated from the mains power supply before all maintenance and cleaning work.
Risk of injury due to electric shock, moving parts (fan) and hot surfaces .
– The housing must be checked for dirt, damage and corrosion every 12 months.
– Clean the housing with a damp cloth.
5 .9

Function tests (manual/auto)

The components connected to the controller can be manually operated and tested individually in this component test
menu.
All functions must be reset to "Auto" after testing. Otherwise, the normal control function will be interrupted and an
Fig .43
Fig .44
Fig .45
55
Fig .42