Ottobock BionicLink 60X7 Gebrauchsanweisung Seite 21

Interference
immunity test
Magnetic field at
mains frequency
(50/60 Hz) according
to IEC 61000-4-8
Note: U is the rated voltage before applying the test levels.
T
Table 4 – Electromagnetic interference immunity for non-life-sustaining devices and sys­
tems
Directives and manufacturer's declaration – electromagnetic interference immunity
The product 'BionicLink 60X7' is designed for operation in an electromagnetic environment as
specified below. The customer or user of the product 'BionicLink 60X7' must ensure that the
device is operated in such an environment.
Interference
immunity tests
Conducted HF inter­
ference according to
IEC 61000-4-6
Radiated HF interfer­
ence according to
IEC 61000-4-3
IEC 60601 test level
3 A/m
IEC 60601 test level
3 V 150 kHz to 80
eff
MHz
3 V/m 80 MHz to
2.5 GHz
Compliance level
3 A/m
Compliance level
N/A
12 V/m 80 MHz to
1 GHz
3 V/m 1 GHz to
2.5 GHz
Electromagnetic
environment direct­
ive
ruptible power supply
or battery.
Magnetic fields at the
mains frequency
should be equivalent
to the typical levels for
commercial or hospital
environments.
Electromagnetic
environment direct­
ive
Portable and mobile
wireless equipment
should not be used at
a lesser distance from
the product 'Bion­
icLink 60X7' including
the lines than the
recommended safety
distance calculated
using the equation
applicable for the
transmission fre­
quency.
Recommended
safety distance:
d = 0.3 √P for 80 KHz
to 800 MHz
d = 2.3 √P for
800 MHz to 2.5 GHz
Where P is the nomin­
al output of the trans­
mitter in watts (W)
according to the trans­
mitter manufacturer
and d is the recom­
Ottobock | 21