Cleaning And Maintenance; Cleaning The Outside Of The Machine - Nuova Simonelli MicroBar Gebrauchsanweisungen

9. CLEANING AND
MAINTENANCE
NEVER use water jets to clean the machine.
9.1
Before carrying out any cleaning operations, set the
machine to the "O" energy level, (machine switched
off and plug removed from the mains).
Never use solvents, chlorine-based products,
abrasives.
Cleaning the work area: remove the worktop, lifting
it up from the front and sliding it out. Remove the
water collection dish underneath and clean every-
thing with hot water and cleansers.
Cleaning the external surfaces: To clean the pan-
els, use a soft, damp cloth.
9.2
NOTE: Follow the instructions on the label applied on
the inside of the front door.
60
Downloaded from www.Manualslib.com
WARNING
CLEANING THE
OUTSIDE OF THE
MACHINE
CAUTION
CLEANING THE
DELIVERY UNIT AND
THE MILK FOAMER
manuals search engine
NOTE: Before starting the washing cycle check and
refill the level of water in the water tank.
The machine is equipped to wash the delivery unit
with detergent tablets and the milk circuit with liquid
cleansers.
The machine will begin a wash cycle that consists
of hot water deliveries alternated with pauses. The
whole cycle lasts approximately 4 minutes.
We recommend that you carry out a WASHING
Fig. 36
CYCLE at least once a day using special cleansers.
We remind you not to interrupt a washing cycle
using detergent tablets once started, other-
wise detergent residues may remain inside the
machine.
In order to execute the washing procedure proceed
as follows:
1. Position a container with water beside the
machine.
2. Put the suction tube inside it.
3. Add the specific cleaning product (20 ml [0.005
Gal] of Puly Milk).
CAUTION
RISK OF INTOXICATION.
UK
Fig. 37
Fig. 38