Energy Saving - Nuova Simonelli MicroBar Gebrauchsanweisungen

UK
To confirm the setting, press the  key, which will
then pass to the settings for the following day.
Press ENTER and the switch on timer will begin to
flash; use the  keys to increase / decrease the
time setting.
Once the required time has been set, press ENTER
to set the following day.
After SATURDAY, press the  key to return to the
previous menu.

10. ENERGY SAVING

This is used to set the time after which the
machine enables the energy-saving device,
while still keeping the water tank at working
temperature.
Press the ENTER key to access the submenu.
1 Hours:Minutes
Use the  keys to increase / decrease the time
after which the ENERGY-SAVING function is enabled
by 30-minute intervals. This function is deactivated if
the timer is left at zero.
Press the RESET to quit the submenu and return to
the main menu, confirming the new setting.
7.5
To access the functions that can only be programmed
using the TECHNICIAN MODE, scroll through all of
the functions that can be accessed from the USER
MODE until the display reads as follows:
Enter the correct password to view the first item in
the programming menu that can be accessed from
the TECHNICIAN MODE.
NOTE: The standard password setting is:
Therefore, to access the functions reserved
to technicians when entering this mode for
the first time, or if the password has not yet
been changed, it is necessary to press the
times in succession.
Downloaded from www.Manualslib.com
TECHNICIAN MODE
PROGRAMMING CYCLE
key on the machine keyboard five
manuals search engine
If an incorrect password is entered, the machine will
automatically quit the programming mode to enter the
machine ready mode.
11. PREINFUSION
Press the ENTER key to access the submenu.
This programmes the possibility of coffee tab
preinfusion (YES or NO) for each single bever-
age.
1 Preinfusion Ristretto
2 Preinfusion 2 Ristretto
3 Preinfusion Espresso
4 Preinfusion 2 Espresso
5 Preinfusion Coffee
6 Preinfusion 2 Coffee
7 Preinfusion CoffeeCreme
8 Preinfusion Caffelatte
9 Preinfusion Macchiato
10 Preinfusion Cappuccino
11 Preinfusion Big Cappuccino
Press the  keys to confirm / cancel tab pre-infu-
sion.
Press the RESET key to quit the submenu and return
to the main menu, confirming the setting.
Press the ENTER key to scroll through each single
item in the submenu and confirm the settings.
12. TAMPING
Press the ENTER key to access the submenu.
This allows you to program the coffee tamping
for each drink (YES or NO).
1 Tamping Ristretto
2 Tamping 2 Ristretto
3 Tamping Espresso
4 Tamping 2 Espresso
5 Tamping Coffee
6 Tamping 2 Coffee
7 Tamping CoffeeCreme
8 Tamping caffellatte
9 Tamping Macchiato
10 Tamping Cappuccino
11 Tamping Big Cappuccino
The arrow keys  cconfirm/disconfirm the tamp-
ing function for each drink.
Press the RESET key to exit the submenu and go
back to the main menu and to confirm the tamping
programmed.
Press the ENTER key to scroll all the items on the
submenu and see confirmation of the tamping pro-
grammed.
55