Manufacturer's Information; Delivery; Packaging; Transport - Gemü 567 BioStar control Betriebsanleitung

8 Manufacturer's information

8 Manufacturer's information
The controller required for valve operation is not included in
the scope of delivery.

8.1 Delivery

● Check that all parts are present and check for any dam-
age immediately upon receipt.
The product's performance is tested at the factory. The
scope of delivery is apparent from the dispatch documents
and the design from the order number.

8.2 Packaging

The product is packaged in a cardboard box which can be re-
cycled as paper.

8.3 Transport

1. Only transport the product by suitable means. Do not
drop. Handle carefully.
2. After the installation dispose of transport packing mater-
ial according to relevant local or national disposal regula-
tions / environmental protection laws.

8.4 Storage

1. Store the product free from dust and moisture in its ori-
ginal packaging.
2. Avoid UV rays and direct sunlight.
3. Do not exceed the maximum storage temperature (see
chapter "Technical data").
4. Do not store solvents, chemicals, acids, fuels or similar
fluids in the same room as GEMÜ products and their
spare parts.
GEMÜ 567

9 Installation in piping

9.1 Installation location

Do not apply external force to the valve.
●
Choose the installation location so that the valve cannot
●
be used as a foothold.
Lay the pipeline so that the valve body is protected
●
against transverse and bending forces, and also vibra-
tions and tension.
Only install the valve between matching aligned pipes.
●
Für einen entleerungsoptimierten Einbau den Antrieb
●
waagerecht einbauen.
The flow direction of the working medium is indicated by
●
an arrow on the valve body.
in open and closed position

9.2 Preparing for installation

The equipment is subject to pressure!
▶ Risk of severe injury or death.
Depressurize the plant.
●
Completely drain the plant.
●
Corrosive chemicals!
▶ Risk of caustic burns.
●
●
Hot plant components!
▶ Risk of burns.
●
Exceeding the maximum permissible pressure.
▶ Damage to the GEMÜ product.
Provide precautionary measures against exceeding the
●
maximum permitted pressures caused by pressure
surges (water hammer).
70 / 88
CAUTION
NOTICE
in open position
WARNING
WARNING
Wear suitable protective gear.
Completely drain the plant.
CAUTION
Only work on plant that has cooled
down.
CAUTION
www.gemu-group.com