Data Settings - PCE -T 330 Bedienungsanleitung

6.2

Data settings

6.2.1 How to enter the menu
- When the meter is
menu.
- You can move the cursor with the arrow keys
- If there is a triangle icon next to a menu option, there will be a sub-option.
- You can exit the menu at any time by pressing F2
settings will then be saved.
Note:
The menu interface will vary according to the selected channel mode, see chart below.
Channel Dual channel merge
mode mode
Option 1 High
Limit
CH1
Option 2 Low
Limit
CH1
Option 3 Alarm
CH1
Option 4 Calibration
6.2.2 How to set the temperature high alarm limit
When you are in the menu, move the cursor to "High Limit-CH1" or "High Limit-CH2".
-
- Press F1
arrow keys arrow keys
- The left and right arrow keys are used to go to the next or previous digit and the up
and down
Note:
In dual channel merge mode, the option for channel 2 is only available after pressing the arrow
right key.
turned on and the function
Single channel
one mode
High High Limit CH1
Limit
CH2
Low Low Limit CH1
Limit
CH2
Alarm Alarm CH1
CH2
Calibration
(Edit) to view the current alarm limit which can be changed with the
, ,
arrow keys are used to change the value.
© PCE Instruments
26
description
, press the F2 key
, ,
(Exit). The changed
Single channel
two mode
High Limit CH2
Low Limit CH2
Alarm CH2
Calibration
and .
area shows
to enter the
and .
Dual channel
difference mode
Difference Limit
Diff Alarm
Calibration