Data Logging - PCE -T 330 Bedienungsanleitung

6.2.3 How to set the temperature low alarm limit
When you are in the menu, move the cursor to "Low Limit-CH1" or "Low Limit-CH2".
-
- Press F1
arrow keys
- The left
and the up
Note:
In dual channel merge mode, the option for channel 2 is only available after pressing the arrow
right key .
6.2.4 How to enable or disable the alarm
When you are in the menu, move the cursor to "Alarm CH1" or "Alarm CH2".
-
- Press F1
Note:
In dual channel merge mode, the option for channel 2 is only available after pressing the arrow
right key .
6.2.5 How to change the temperature difference alarm value
- In dual channel difference mode, enter the menu.
Move the cursor to "Difference Limit".
-
- Press F1
- The left
and the up
- Press F1
saving the change.
6.2.6 How to enable or disable the temperature difference alarm
- In dual channel difference mode, enter the menu.
Move the cursor to "Diff-Alarm".
-
- Press F1
(OFF).
When the absolute value of the temperature difference between the two channels is greater than
the set temperature difference alarm value, the temperature difference alarm is triggered.
6.3

Data logging

Note:
This product supports 20,000 data points.
(Edit) to view the current alarm limit which can be changed with the
, , and
and right arrow keys are used to go to the next or previous digit
and down arrow keys are used to change the value.
(Set) to turn the channel's temperature alarm on (Beep) or off (OFF).
(Edit) to view the temperature difference alarm value.
and right arrow keys are used to go to the next or previous digit
and down arrow keys are used to change the value.
(Ok) to save the change or F2
(Set) to turn the temperature difference alarm on (Beep) or off
© PCE Instruments
27
.
(Back) to go back without