Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6
Settings
6.1
Instrument settings
6.1.1
How to enter configuration mode
-
When the meter is turned on and the function
description
the F1 key
-
You can move the cursor with the arrow keys
,
-
You can exit configuration mode at any time by
pressing F2
6.1.2
How to set the channel mode
When you are in configuration mode, move the cursor to "Channel Mode" and press F1
-
(Enter).
-
Use the arrow keys
Then press F1
channel modes.
6.1.3
How to activate/deactivate key sounds
When you are in configuration mode, move the cursor to "Sound".
-
The key sounds can be turned "ON" or "OFF" by pressing F1
-
press F2
6.1.4
How to set automatic shutdown
When you are in configuration mode, move the cursor to "Auto Off".
-
Automatic shutdown can be set to "10 min" or "OFF" with the F1 key
-
When the automatic shutdown function is on, the instrument will automatically turn off if
no button is pressed for 10 minutes.
-
When you press F2
6.1.5
How to restore factory settings
When you are in configuration mode, move the cursor to "Recovery".
-
-
Press F1
After 5 seconds, you can select "Yes" with F1
-
area
to enter configuration mode.
and
.
(Exit).
,
,
(OK) to confirm or press F2
(Exit), the setting will be saved.
(Exit), the setting will be saved.
(Enter) to open the reset query.
© PCE Instruments
25
shows
,
press
,
and
to select the desired mode.
(Back) to exit the list of
or "No" with F2
(Set). When you
(Set).
.
Werbung
Inhaltsverzeichnis
Fehlerbehebung
