Function Keys - PCE -T 330 Bedienungsanleitung

3.3

Function keys

Short press: Press the button and then raise it; you can hear a beep when pressing.
Press and hold: Press and hold the button for about 2 seconds; raise it when hearing a beep.
When the corresponding function of the button is valid, there will be a beep sound. No sound
means the current function is not available or the button sound is turned off.
The keys have the following functions:
Key
The multi-function keys F1 and F2 can have the following functions:
Commonly used functions F1
Config Enter configuration interface
Enter Go to next level option interface
Set Change settings of current option
Ok Confirm changes to an option or
value
Yes Perform an action
Function
Multi-function key 1
The function will be displayed at the bottom left-hand
side of the screen, see next chart.
Meter on (short press) / off (press and hold)
Backlight on / off
Multi-function key 2
The function will be displayed at the bottom right-hand
side of the screen, see next chart.
Switch type of probe
Hold reading
Display maximum / minimum / average value
Switch unit of measurement
Commonly used functions F2
Edit Edit a value
Menu Enter menu
Exit Exit configuration interface or menu
Back Return to previous interface or exit editing
interface
No Cancel an action
© PCE Instruments
21