File Backup - PCE -T 330 Bedienungsanleitung

6.3.1 How to enter data logging mode
When you are in the menu, move the cursor to "Logging".
-
- Press F1
6.3.2 How to start recording
Note:
The internal memory will be cleared when recording is started, so the data last recorded will be
cleared.
Note:
The automatic shutdown function will be disabled.
Note:
The icon will be displayed during recording.
When you are in the "Logging" menu, move the cursor to "Start Logging".
-
- Press F1
- Then press F1
cancel.
6.3.3 How to stop recording / save the logging data
Note:
The recorded data will be saved to a file that is generated automatically after recording is stopped.
These files can be viewed on a computer.
- Press F1
Recording also stops when
- the battery voltage is insufficient
- the battery is loose
- the meter is turned off.
6.3.4 How to view the recorded data
When you are in the "Logging" menu, move the cursor to "View".
-
- Press F1
- You can scroll through the content with the arrow up and arrow down keys.
6.3.5

File backup

Note:
Set the file format before generating files. The old file will be cleared when a new file is generated.
Therefore, it is important to make a backup.
When you are in the "Logging" menu, move the cursor to "Regenerate File" and press
-
F1
(Enter) to enter the "Logging" menu.
(Enter) to confirm.
(Start) to start recording or press F2
(Stop) to stop recording.
(View).
(Ok) to recover a corrupted file.
© PCE Instruments
28
(Exit) to