Using I/O Link.a; I/O Link.a - Pioneer PDP-4280XA Bedienungsanleitung

Using with other equipment
Rear view
a
b
c
When SR+ is not used (a, b and c):
The control cables (commercially available) are mono sound cables
with mini plugs (no resistance).
When SR+ is used (a):
Use the SR+ cable (available as option).

Using i/o link.A

The plasma television incorporates three typical i/o link.A functions
for smooth connections between plasma television and other
audiovisual equipment.
One Touch Play
While the plasma television is in standby mode, it automatically
turns on and plays back images from the audiovisual source (e.g.
VCR, DVD).
WYSIWYR (What You See Is What You Record)
When the remote control unit of the connected VCR has the
WYSIWYR button, you can automatically start recording by pressing
the WYSIWYR button.
CONTROL
IN
Preset Download
OUT
Automatically transfers channel preset information from the tuner
on the plasma television to the one on the connected audiovisual
equipment (e.g. VCR) via the INPUT 2 or INPUT 3 terminal.
CONTROL
IN Selecting the SCART terminal for use with
OUT

i/o link.A

The INPUT 2 and INPUT 3 terminals on the plasma television are
available for use with i/o link.A. Select which is to be used.
1
CONTROL
IN
2
OUT
3
4
Item
INPUT 2 (default) INPUT 2 is available for i/o link.A
INPUT 3
5
Press HOME MENU.
Select "Setup" (/ then ENTER).
Select "i/o link.A" (/ then ENTER).
Select a setting (/ then ENTER).
Description
INPUT 3 is available for i/o link.A
Press HOME MENU to exit the menu.
Note
• The i/o link.A functions work only when the audiovisual
equipment is connected to the INPUT 2 or INPUT 3 terminal on
the plasma television with i/o link.A via a fully wired 21-pin
SCART.
• Refer to operation manuals of each external equipment for the
details.
• If a SCART cable has been connected to the INPUT 3 terminal
with the i/o link.A activated, input signals (other than
Component) are automatically identified and displayed. If the
i/o link.A has been deactivated, Video is always selected for
signals other than RGB because the system cannot identify
among RGB, Y/C (S-Video), and CVBS (Video) signals; for
example, receiving Y/C (S-Video) signals results in monochrome
display.
10
47
En