Using I/O Link.a; I/O Link.a - Pioneer PDP-LX608D Bedienungsanleitung

Using with other equipment
Rear view
a
b
c
When SR+ is not used (a, b and c):
The control cables (commercially available) are mono sound cables
with mini plugs (no resistance).
When SR+ is used (a):
Use the SR+ cable (available as option).

Using i/o link.A

The plasma television incorporates three typical i/o link.A functions
for smooth connections between plasma television and other
audiovisual equipment.
One Touch Play
While the plasma television is in standby mode, it automatically
turns on and plays back images from the audiovisual source (e.g.
VCR, DVD).
WYSIWYR (What You See Is What You Record)
When the remote control unit of the connected VCR has the
WYSIWYR button, you can automatically start recording by pressing
CONTROL
IN
the WYSIWYR button.
OUT
Preset Download
Automatically transfers channel preset information from the tuner
on the plasma television to the one on the connected audiovisual
CONTROL
equipment (e.g. VCR) via the INPUT 2 or INPUT 3 terminal.
IN
OUT
Selecting the SCART terminal for use with

i/o link.A

The INPUT 2 and INPUT 3 terminals on the plasma television are
CONTROL
IN available for use with i/o link.A. Select which is to be used.
OUT
1
2
3
4
Item
INPUT 2 (default) INPUT 2 is available for i/o link.A
INPUT 3
5
• The i/o link.A functions work only when the audiovisual
• Refer to operation manuals of each external equipment for the
• If a SCART cable has been connected to the INPUT 3 terminal
Press HOME MENU.
Select "Setup" (/ then ENTER).
Select "i/o link.A" (/ then ENTER).
Select a setting (/ then ENTER).
Description
INPUT 3 is available for i/o link.A
Press HOME MENU to exit the menu.
Note
equipment is connected to the INPUT 2 or INPUT 3 terminal on
the plasma television with i/o link.A via a fully wired 21-pin
SCART.
details.
with the i/o link.A activated, input signals (other than
Component) are automatically identified and displayed. If the
i/o link.A has been deactivated, Video is always selected for
signals other than RGB because the system cannot identify
among RGB, Y/C (S-Video), and CVBS (Video) signals; for
example, receiving Y/C (S-Video) signals results in monochrome
display.
12
65
En