Setting Up; Setting Up Tv Channels; Using Auto Installation; Setting Up Analogue Tv Channels Manually - Pioneer PDP-4280XA Bedienungsanleitung

08

Setting up

Chapter 8
Setting up

Setting up TV channels

This section describes how to automatically search for and set up
TV channels.

Using Auto Installation

When the plasma television is switched on for the first time after
purchase, the initial auto installation is initiated. You can
automatically set language, country and channels in successive
operations.
1 Select "Language" (/).
2 Select a language (/).
Auto Installation
Language
Country
Installation
You can select from among 17 languages; English, German, French,
Italian, Spanish, Dutch, Swedish, Portuguese, Greek, Finnish,
Russian, Turkish, Norwegian, Danish, Czech, Polish and Ukrainian.
3 Select "Country" (/).
4 Select the country (/).
5 Select "Start" (/ then ENTER).
Auto Installation automatically starts.
• To quit Auto Installation in progress, press RETURN.
Note
• You can start Auto Installation from the HOME MENU after
moving to another country, for example. Perform the following
steps before starting Auto Installation: Press HOME MENU,
select "Setup" (/ then ENTER), then "Auto Installation" (/
 then ENTER). The password entry screen appears. Enter your
four-digit password using buttons 0 to 9.
• If no channel is found, check the antenna connections, and
then retry Auto Installation.
24
En
Setting up analogue TV channels
manually
Use the Manual Adjust function to set up TV channels manually.
1
2
3
The password entry screen appears. Enter your four-digit password
using buttons 0 to 9. For the password, see Using a password on
page 39.
4
5
6
English You can select 1 through 99.
Austria
Start
7
8
You can also press / to enter a frequency.
9
10 Select a sound system (/).
You can select from among "B/G", "D/K", "I", "L", and " L' ".
11 Select "Colour System" (/).
12 Select a colour system (/).
You can select from among "Auto", "PAL", "SECAM", and "4.43NTSC".
13 Select "Store" (/).
14 Select "Yes", "Yes (Listed)", or "No" (/).
Press HOME MENU.
Select "Setup" (/ then ENTER).
Select "Analogue TV Setup" (/ then ENTER).
Select "Manual Adjust" (/ then ENTER).
Select "Programme Entry" (/).
Select a programme number (/).
Manual Adjust
Programme Entry
Search
System
Colour System
Store
Tuner NR
Child Lock
Decoder
Select "Search" (/).
Enter a frequency using buttons 0 to 9, then ENTER.
Select "System" (/).
1
42.75MHz
B/G
Auto
Yes
On
View
Off