Herunterladen Inhalt Inhalt Diese Seite drucken

Pioneer PDP-4280XA Bedienungsanleitung Seite 57

Plasma-fernseher
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 122
Additional information
Problem
• Images are presented but no
audio is output.
• Picture is cut off.
• Strange colour, light colour, dark
or colour misalignment.
• After-image lag.
• Brightness and colour tone on
both sides differ from those in the
centre in 4:3 mode.
HDMI Control
• HDMI Control functions do not
operate.
• No image and audio is
presented.
• No picture
• No sound
•An error message "The device
cannot be operated. Please check
the connection." appears.
Possible solution
• Check if you have selected the minimum volume. (See page 21.)
• Check that no headphones are connected.
• Check that the sound is not muted. (See page 21.)
• When using "INPUT 5" as the input source, check that the audio terminal is also properly
connected. (See page 42.)
• When using PC as the input source, check that the audio terminal is also properly connected.
(See page 43.)
• When using "COMPONENT" for "INPUT 2", check to see if the settings are properly entered. (See
pages 36 and 41.)
• Is the image position correct? (See pages 35 and 36.)
• Has the correct screen size been selected? (See page 37.)
• Adjust the picture tone. (See pages 28 to 32.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the colour system setting. (See page 36.)
• After displaying a still image or a very bright image for a certain period of time, if the screen is then
switched to a darker scene, the previous image may appear as an after-image.
• This can be rectified by playing a rather bright moving image for several minutes. However, displaying
a still image for excessively long periods of time may cause permanent display deterioration.
• You can display the "Video Pattern" screen that helps eliminate after-image when it occurs. (See
page 39.)
• If images in 4:3 mode or letterbox images are displayed for long periods or for shorter periods over
several days, an after-image may remain due to burning. This is a characteristic of plasma displays.
• We recommend that you enjoy watching images in a full screen mode as much as possible. (See
page 37.)
• We recommend you select "Auto" for "Brightness Sync." in the Side Mask setting. This adjusts the
brightness of the grey side masks according to the brightness of the main image. (See page 38.)
• Check if the connections are properly made between the plasma television and the device that
supports the HDMI Control functions. (See page 49.)
• Check if you have entered the settings properly for "HDMI Control Setting". (See page 51.)
• Check if the settings for the HDMI Control functions are effective on the connected device(s). For
details, refer to the operation manual that came with the device.
• Check if the connections are properly made between the plasma television and the device that
supports the the HDMI Control functions. (See page 49.)
• Check if you have entered the settings properly for the HDMI Control Setting. (See page 51.)
• Check if you have selected "Enable" in "HD AV Converter" for "HDMI Control Setting" even though
no HD AV Converter is connected. Select "Disable" if that is the case. (See page 51.)
• Check that the HD AV Converter is connected to INPUT 4 if you have selected "Enable" in "HD AV
Converter" for "HDMI Control Setting". (See page 51.)
• Check if the connections are properly made between the plasma television and the device that
supports the HDMI Control functions. (See page 49.)
• Check if you have entered the settings properly for "HDMI Control Setting". (See page 51.)
• Check if the connections are properly made between the plasma television and the device that
supports the HDMI Control functions. (See page 49.)
• Check if you have entered the settings properly for "HDMI Control Setting". (See page 51.)
• Check if the connections are properly made between the plasma television and the device that
supports the HDMI Control functions. (See page 49.)
• Check if you have entered the settings properly for "HDMI Control Setting". (See page 51.)
13
57
En

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Pdp-5080xa

Inhaltsverzeichnis