Tuner Setup; Setting Up Tv Channels; Scanning Channels Automatically; Scanning Analogue Channels Manually - Pioneer pdp-42rxe Bedienungsanleitung

Tuner Setup

Setting up TV channels

This section describes how to search and set up TV channels
that you can watch under the current conditions. Unless you set
up TV channels using Scan Channels, you may not be able to
tune in any channels.

Scanning Channels Automatically

You can automatically scan channels for the frequency ranges
available.
1
Press the MENU button.
2
Press the c or d button to move to Tuner Setup, then
press the \ or OK button.
Tuner Setup
Scan Channels
Scan Analog Channel
Edit Channel List
Move Enter
3
Select Scan Channels and press the \ or OK button.
4
Select Country and press the \ or OK button.
5
Press the c or d button to select the desired country or
area, then press the [ or BACK button.
• You can select from 22 countries or areas; Austria,
Belgium, Denmark, Finland, France, Germany, Greece,
Ireland, Italy, Luxembourg, Netherlands, Norway,
Poland, Portugal, Russia, Spain, Sweden, Switzerland,
Turkey, UK, East Europe and West Europe.
6 Move to Start by pressing the c or d button and start the
search by pressing the \ or OK button.
Scan Channels
Analog Channel
Now Searching
30%
Analog Channels 0
Cancel
The scan starts. The scanned channels are automatically
stored in order. To stop scanning, press the BACK button.
7
When finished scanning, press the EXIT button.
• When using the Cable Converter, you may need to manually add
Cable Converter output channels.

Scanning Analogue Channels Manually

You can choose if you want to store the channels.
1
Press the MENU button.
2 Press the c or d button to move to Tuner Setup, then
press the \ or OK button.
Return
3 Press the c or d button to move to Scan Analog
Channel, then press the \ or OK button.
Tuner Setup
Scan Channels
Scan Analog Channel
Edit Channel List
Move Enter
4
Select Colour System and press the \ or OK button.
5
Press the c or d button to select the desired colour
system (Auto, PAL or SECAM), then press the [ or
BACK button.
6 Press the c or d button to select Audio System, then
press the \ or OK button.
7
Press the c or d button to select the desired audio
system (BG, I, DK, L or L'), then press the [ or BACK
button.
8 Press thec or d button to select Band, then press the \
or OK button.
9
Press the c or d button to select the desired band (VHF/
UHF or Cable), then press the [ or BACK button.
10
Move to Channel by pressing the c or d button and
select the channel number by pressing the [ or \
button. Or move to Search by pressing the c or d button
and search the channel by pressing [ or \ button.
Scan Analog Channel
Colour System
Audio System
Band VHF/UHF
Channel
Programme No
Name Channel
Search
Fine Tune
Store
Move Adjust
11 Press the c or d button to move to Programme No and
select the programme by pressing [, \ or 0 to 9 buttons.
12
Press the c or d button to move to Store, then press the
\ or OK button.
• You can receive the selected channel.
13 If you want to edit the channel name, press the c or d
button to move to Name Channel, then press the \ or
OK button.
Scan Analog Channel
Colour System
Audio System
Band VHF/UHF
Channel
Programme No
Name Channel
Search
Fine Tune
Store
Move Enter
14
Press the c or d button to select a letter (A~Z, a~z), a
number (0~9) or a symbol (space, {I}~! "#$%& '()*+,-./:;
<=>?@[\]^_`). Move to the previous or next letter by
pressing the [ or \ button.
15
When you have finished entering the channel name, press
the OK button.
16
Press the c or d button to move to Store, then press the
\ or OK button.
Return
Auto
BG
2
1
Return
Auto
BG
2
1
Return
08
25
En