Changing The Engraving Tips - Parkside PGG 15 E4 Originalbetriebsanleitung

Changing the engraving tips

CAUTION! RISK OF INJURY!
► Switch the appliance off and remove the power plug before com-
mencing any work to the appliance .
♦ Change the engraving tip
er delivers the desired engraving results . Turn the engraving tip lock
anticlockwise until the engraving tip
♦ Remove the spring and washer .
♦ Slide the washer and spring onto a new engraving tip
it into the appliance and turn the engraving tip lock
lock the tip .
♦ Ensure that the engraving tip
■ 28 │ GB │ IE
as soon as it becomes worn and no long-
can be removed .
is fixed correctly in place .
. Then insert
clockwise to
PGG 15 E4