Vetus Meteoliner Anleitung Seite 30

The accoustic signal can be acknowledged immediately by
pressing the right-hand button. However the warning will sound
again after 10 minutes when a gale risk still exists. The visual indi-
cator 'GALE' remains on the display until the gale risk no longer
exists.
5.3 Display of the previous week's pressure curve
The previous week's pressure curve can be requested by press-
ing the left-hand button.
Recorded pressure range: 950 - 1070 hPa (fixed framing mask)
-7 -6 -5 -4 -3 -2 -1 days (+ actual day)
The initial setting is re-established by pressing the left-hand but-
ton again.
30
10.0801
5.4 Initialization
The procedure is used to reset all data into the initial setting and
is to be carried out should a malfunction occur.
Note: An already traced pressure curve will be erased during
initialization!
Firstly, press the right-hand button until the display is complete,
then press additionally the left-hand button.
Three acoustic signals follow which indicate that the gale warning
signal transmitter is functional again, then proceed according to
section 5.2.
Baroscope