Panel Mounting; Initial Start - Vetus Meteoliner Anleitung

4.3 Panel mounting

The Baroscope can be panel mounted, with the aid of an installa-
tion kit (Vetus art. code METEOFR).
The two aluminium frames are pushed into the chamfered groove
of the Baroscope, and screwed onto the panel.
28
10.0801
Panel
Mounting set
5 Starting to use the unit
5.1 Power connection (according to section 3)
5.2 Set-up mode
Request a display by pressing the right-hand button.
The set-up mode appears immediately on the display when initial
operation takes place.
Otherwise, press the middle button in order to enter the set-up
mode.
In the setup-mode:
• Left-hand pushbutton:
• Middle button:
• Right-hand pushbutton: For leaving the setup-mode
For setting the digits
For shifting the cursor
Baroscope