Date & Time - Carl Valentin VARIO III Kurzanleitung Und Hinweise Zur Produktsicherheit

Key:
Printhead resolution
Key:
Drive mapping
Key:
PJL (Printer Job
Language)
Date & Time
Keys: , , ,
Set date and time
Key:
Summertime
Key:
Start of summertime
(format)
Key:
Start of summertime (date)
Key:
Start of summertime (time)
Key:
End of summertime
(format)
Key:
End of summertime (date)
Key:
End of summertime (time)
®
At activated ZPL II emulation the printhead resolution of the emulated device must be set.
NOTICE!
If the printhead resolution of the Zebra
device, then the size of objects (e.g. texts, graphics) complies not exactly.
®
The access to Zebra drives is rerouted to the corresponding Valentin drives.
NOTICE!
As the build-in fonts in Zebra
cause small differences in the text image.
Status information regarding the print order can be indicated.
, , , ,
The upper line of display shows the current date, the second line the current time.
With keys and you can change to the next or previous field. With keys
can increase and/or decrease the displayed values.
On: Printer automatically adjust clock for daylight saving changes.
Off: Summertime is not automatically recognized and adjusted.
Select the format in which you want to define beginning summertime.
DD = day
WW = week
WD = weekday
MM = month,
Y = year
next day = only next day is taken into consideration
By means of this function you can enter the date at which summertime has to start. This entry
refers to the previously selected format.
By means of this function you can define the time when you want to start summertime.
Select the format in which you want to define end of summertime.
By means of this function you can define the date when you want to stop summertime. The
entry refers to the previously selected format.
By means of this function you can define the time when you want to stop summertime.
English
®
printer differs from that of the Valentin
®
printers are not available in Valentin devices this can
,
Vario III
and you
107