Carl Valentin VARIO III Kurzanleitung Und Hinweise Zur Produktsicherheit Seite 104

Vario III
Key:
Buzzer
Display
Key:
Printer language
Key:
Keyboard layout
Key:
Customized entry
Key:
Hotstart
Key:
Autoload
Key:
Manual reprint
Key:
Backfeed/Delay
Key:
CMI length
104
On: An acoustic signal is audible when pressing a key.
Value range: 1 ... 7.
Off: No signal is audible.
Setting of display contrast.
Value range: 45 ... 75.
Selection of language in which you want to display the text in the printer display.
At the moment the following languages are available: German, English, French, Spanish,
Finnish, Czech, Portuguese, Dutch, Italian, Danish, Polish, Greek, Hungarian, Russian,
Chinese (option), Ukrainian, Turkish, Swedish, Norwegian.
Selection of region for the desired keyboard layout.
The following possibilities are available: German, English, French, Greek, Spanish, Swedish,
US, Russian.
Off: No question appears at the display. In this case the stored default value is printed.
On: The question referring the customized variable appears once before the print start at the
display.
Auto: The questions referring the customized variable and the quantity query appear after
every printed layout.
Auto without quantity query: The question referring the customized variable appears after
every layout without additional query for the quantity.
On: Continue an interrupted print order after switching on the printer anew.
Off: After switching off the printer the complete data is lost.
On: A label which was loaded once from Compact Flash card can be loaded again
automatically after a restart of printer.
The last loaded label from CF card is always again loaded after a restart of printer.
Off: After a restart of printer the last used label must be again loaded manually from the
memory card.
A common use of the functions Autoload and Hotstart is not possible.
Yes: I In case an error occurred and printer is in stopped mode then you can reprint the last
printed labels by means of keys
No: Only blank labels were advanced.
Backfeed: The backfeed was optimised in the operating modes dispenser (optional) and cutter
(optional). Now, when driving into the offset, the following label is 'pre-printed' if possible and
therefore the backfeed of label is no necessary and time can be saved.
Delay: The adjustable deceleration time is only for mode Backfeed automatic of importance.
If the print is interrupted in the label, at the printhead this could lead to a small interruption in
the printout, showing a fine white line onto the label. To avoid this, a value for the minimum
backfeed can be set (0 – 1 mm) at which the label material is moved backwards. At the next
print start the free range is overprinted. The setting of CMI length has only an influence at the
selection of backfeed mode 'optimised backfeed'.
English
and .