Unify OpenScape DECT Phone S5 Base Bedienungsanleitung Seite 120

System
Change the telephone's 4-digit system PIN (default setting: 0000):
¤
. . . use
PIN OK . . . use
enter new system PIN
Resetting system PIN
Resetting the base station to the original PIN 0000:
¤
Unplug the network cable from the base station
key on the base station
station Press and hold the key for at least 5 secs . . . the base station is reset and the system
PIN is set to 0000
All handsets are de-registered and must be re-registered. All settings are returned to
default settings.
Restoring the phone to default settings
When the settings are reset
•
the date and time are retained,
•
handsets are still registered,
•
the system PIN is retained,
•
Max. Reichweite is activated and Strahlungsfrei is deactivated.
¤
. . . use
Reset OK . . . use
restart takes around 10 seconds.
120
to select Einstellungen
to enter the current PIN (if other than 0000)
Sichern
At the same time reconnect the network cable to the base
to select Einstellungen
to enter system PIN
OK System
Press and hold the Registration/Paging
OK System
OK Ja . . . the base station is restarted. The
OK System-
OK . . . use to
OK Basis-