Tare (Tare Function) - Silvercrest Z31183 Bedienungs- Und Sicherheitshinweise

In the metric system:
– Millimetre (ml) water:
– Millimetre (ml) milk:
In the imperial / avoirdupois system:
– Fluid ounces (fl. oz) water:
– Fluid ounces (fl. oz) milk:
Press the ON / OFF button
weighing mode. The set unit of weight appears under to
the right of the weight in the LC display
Press and hold the ▼ UNIT button
to change the unit of weight (g / lb'oz).
The weight "0" is shown in the LC display. Place a suitable
bowl or container on the balance tray
▲ Z / T button
the LC display. The weight of the bowl / container is not
displayed.
Place the product to be weighed in the bowl / container.
The weight of the product is shown in the LC display.
Note: If no button is pressed for 2 minutes, or the weight
is not changed, the readout in the LC display always returns
to the time mode.

Tare (TARE function)

You can set the appliance to "0" again, so that you can weigh
out another product.
Note: A small circle-symbol appears in the left of the LC display
as soon as the appliance is switched on. The display is now in
12 GB
"WATER" is shown in the
LC display.
"MILK" is shown in the
LC display.
"WATER" is shown in the
LC display.
"MILK" is shown in the
LC display.
3
. Again, the weight "0" is shown in
7
. The appliance is now in
.
5
for about 2 seconds
6
and press the
2