Adding & Weighing (Tare Function); Removing Weighed Items; Setting The Timer; Temperature Display - Silvercrest KH 1156 Bedienungsanleitung

You can choose between the metric and the
Anglo-American (Imperial) system. The selec-
ted unit appears under the weight-details in the
dis-play. From 0g-999g the unit is shown in
g/oz and from 999g in kg/lbs and g/oz.
The scale shows the weight "0".
➩ Place the item(s) to be weighed into the bowl.
The weight is shown on the display.
If you would like to switch the display between
grammes and ounces, press the KG/LB-Button
r
.
Adding & Weighing (Tare Function)
You can repeatedly set the scale back to 0 in order
to weigh additional partial quantities.
➩ To do this, press the Z/T-Button once
scale shows 0 Gramm again.
➩ Place the item(s) to be weighed in the bowl.
In the display, the weight of the newly placed
item(s) is shown.
You can repeat this procedure several times.
However, never place more than 11 lb on the
scale.

Removing Weighed Items

➩ Press the Z/T-Button once
gramme again
➩ Remove the desired amount of material.
The weight value of the removed material appears
in the display as a negative value.
You can repeat this procedure several times.
w . The
w . The scale shows 0

Setting the Timer

The Timer enables you to set the clock for a specific
period of time, at the end of which a signal tone
sounds. The preset time runs as in a countdown.
➩ Press once on the Clock-Button
The bell symbol appears in the display
top left, next to the clock.
➩ Enter the desired time period with the Z/T
resp. the KG/LB-button
You can set the time in 10 second steps. If you hold
w
the Z/T resp. the KG/LB-button
nuously, the figures run through faster.
➩ Press the Clock-Button
down.
You can stop the timer.
➩ Press once on the Clock-Button
Timer.
You can reset the timer.
➩ Press twice on the Clock-Button
Timer.
When the configured time has elapsed, a signal
tone sounds for 60 seconds.
This signal tone can be switched off by pressing the
On/Off-Button q .

Temperature Display

When the scale is switched on, the display
shows the temperature in °C at the top right.

Switching the scale off

If you do not weigh anything for ca. 90 seconds,
the automatic power off switches the scale off.
➩ To switch the scale off manually, press the
On/Off-Button q
- 4 -
e .
t
r .
r
down conti-
e , to start the count-
e , to stop the
e , to reset the
t
.
at the
w